Monitor Stands with Speakers or Built-In Cable Management

Disclosure: Some links in this article are affiliate links. We may earn a commission on qualifying purchases at no extra cost to you.

The only stand in this roundup that genuinely contains the speakers is the Philips SPA6500BK/00, a 15 kg platform with a 10 W stereo system and a USB dock built into the base. Everything else solves the other half of the same clutter problem, and if you are after an articulated mount rather than a riser, the best single monitor arms for a minimalist setup cover that ground separately.

Two things separate these products more than the listings do. The first is where the cables physically end up: an arm channel hides the monitor-to-arm run and stops there, and build volume varies enough between models that a thick power cable can fail to fit where a data cable succeeds. The second is mounting. A riser sits on the desk and keeps the factory monitor stand, while an arm clamps or grommets to the desk edge and needs rear clearance that is rarely advertised.

One clarification before the picks. A stand with speakers for a computer monitor is a desktop platform with built-in drivers. A speaker stand holds a separate studio monitor or bookshelf speaker. The two share keyword space, and every product below is the first kind.

Quick Picks

• Philips SPA6500BK/00: all-in-one stand with a 10 W stereo system, USB dock and Bluetooth
• MaxMount STB-211L: wide budget riser with speakers built into the housing
• StarTech MONSTADJDL: fixed riser with a documented cable manager and a drawer
• VIVO STAND-V001: budget single arm with cable channels on arm and pole
• HUANUO HNDS6: dual gas-spring arm with integrated routing
• Ergotron LX 45-241-224: premium single arm with a 10-year warranty
• Monoprice Workstream #43448: heavy-duty arm for 32 to 49-inch displays
• Humanscale M8 Pro Dual: premium office dual arm for sit/stand desks

What to Look For in This Category

Where the cables go is the first question, and the honest answer is usually "less than the picture suggests." An arm's channel hides the short run from the monitor down the arm and the pole. It does not touch the power brick, the dock, the PC or the wall socket, so the visible desktop can look clean while the underside stays messy. Plan a second layer for the non-monitor run rather than expecting the arm to absorb it, and treat the guide to hiding cables under your desk and the best under-desk cable management trays as the companion to whichever mount you pick.

Channel volume is a real specification even though almost no brand publishes it. An Ergotron LX owner could fit monitor power plus Thunderbolt through the channel but not those two plus HDMI. A HUANUO HNDS6 owner reported one cable running easily through the lower channel while the thicker power cable was a struggle, with the workaround being to route the thin cables first and secure the thick one externally. Cables also need slack at the joints, because a tightly pre-tied bundle can fight the arm's movement.

Mounting geometry deserves the same weight as the screen specs. A clamp needs a clear, flat rear edge and enough overhang, and cable trays, rear crossbars or a desk pushed flush to a wall can block an install even when the desktop thickness is nominally within range. Grommet mounting needs a compatible hole and access underneath. A riser avoids all of it but occupies desktop depth. The clamp versus grommet breakdown is worth reading before you commit to a mount type.

Finally, weight ratings say less than people assume. Deep curved displays shift their centre of mass forward and load the tilt joint differently from a flat panel of the same mass, so check the exact panel's weight, VESA pattern, depth and curvature rather than trusting a diagonal figure. The VESA compatibility guide covers how pattern and plate clearance interact.

#1 Philips SPA6500BK/00: A Stand, Dock and Speaker System in One Unit

The Philips is the closest thing here to a monitor stand that replaces three separate accessories. Its base holds a two-channel speaker system with full-range drivers and a published frequency response, and the same chassis carries a USB hub, Bluetooth and a microphone. It can hold a monitor, a laptop or a desktop PC on the platform, which makes it a small all-in-one desktop base rather than a display-only riser.

Specs

• Platform load: up to 15 kg / 33.1 lb
• Audio: 5 W + 5 W (10 W total), 4-ohm impedance, 65 Hz to 20 kHz frequency response, 83 dB sensitivity
• Bluetooth 5.4, approximately 10 m range
• Ports: USB-C charging and data, three USB-A
• Built-in microphone, external microphone input, headphone output
• RGB lighting with dynamic and ambient modes
• Dimensions: approximately 521 × 95 × 211.5 mm; main unit 1.93 kg

Check the Philips SPA6500BK/00 on Amazon

Pros

• Speakers, USB hub and riser share one footprint
• A 15 kg platform carries a large display
• Bluetooth and a built-in mic cover calls without extra hardware

Cons

• Little independent owner coverage to draw on
• Speaker placement is fixed, unlike separate desktop speakers
• No routing channel; it consolidates ports, not cables

Verdict: the Philips SPA6500BK/00 is the pick when the audio and the dock should live inside the stand. Anyone who wants to position the speakers deliberately, or upgrade them later, is better served by separate drivers.

Perfect for: a single-desk setup that wants one platform for a screen, USB peripherals and sound.

#2 MaxMount STB-211L: A Wide Budget Riser With Speakers Built In

The MaxMount trades audio detail for platform size. Its 85.6 cm width and 20 kg rating let it sit under a wide monitor or an ultrawide base, and the speakers are built into the riser housing rather than added alongside it. MaxMount does not publish speaker wattage or frequency response for the current specification, so its audio cannot be compared to the Philips on numbers, only on format.

Specs

• Supports one monitor up to 32 in, up to 20 kg / 44.1 lb
• Dimensions: 85.6 cm wide × 24 cm deep × 11.6 cm high
• Materials: MDF, plastic, silicone, steel
• Connectivity: USB 2.0, headphone output
• Supplied cable: 1.5 m
• Two-year warranty
• Speaker wattage and frequency response: not published

Check the MaxMount STB-211L on Amazon

Pros

• Wide platform suits ultrawide and wide-base monitors
• High 20 kg load rating for a riser of this type
• Two-year manufacturer warranty

Cons

• No published speaker specifications
• Very little exact-model owner feedback
• USB 2.0 rather than a modern hub

Verdict: the MaxMount STB-211L is the budget route to a riser with speakers, and its width is its real advantage. Judging the audio is difficult without published figures, so buy it for the platform and the concept, not for a measured sound claim.

Perfect for: a wide single monitor on a budget where the speakers just need to exist inside the stand.

#3 StarTech MONSTADJDL: A Fixed Riser With a Documented Cable Manager

StarTech names a built-in cable manager on this riser, which is more specific than the usual "keeps your desk tidy" line. The platform is 500 × 330 mm and holds 10 kg, with under-platform space large enough for a laptop, an integrated drawer for accessories and a front slot for a phone or tablet. Because it is a riser and not an arm, it needs no VESA holes, no drilling and no desk-edge clamp, and it keeps the monitor's factory base intact.

Specs

• Platform: 19.7 × 13 in / 500 × 330 mm
• Supports 13 to 32 in monitors, up to 22 lb / 10 kg
• Three height settings using stackable columns, maximum 6.6 in / 168 mm
• Built-in cable manager
• Under-platform storage sized for a laptop
• Integrated drawer; front slot for phones and tablets
• Non-skid column bases
• Plastic, approximately 3.6 lb / 1.64 kg
• Five-year warranty with lifetime technical support

Check the StarTech MONSTADJDL on Amazon

Pros

• No VESA, drilling or clamp required
• Under-platform storage and a drawer in the same footprint
• Five-year warranty

Cons

• Only three preset heights
• Large 500 × 330 mm footprint
• Plastic construction
• The cable manager covers the monitor area only, not the full desk run

Verdict: the StarTech MONSTADJDL is the pick for anyone who wants cable organization and storage without touching the desk. If you also want storage under the platform, it belongs in the same shortlist as the monitor stands with storage and drawers.

Perfect for: a work desk that wants a fixed riser, a drawer and a place to park a laptop.

#4 VIVO STAND-V001: Cable Channels on Arm and Pole for the Least Money

VIVO routes cables along both the arm and the centre pole of this single-monitor mount, which is the clearest budget example of genuine integrated routing in this roundup. It fits 13 to 32 in displays and ultrawides up to 38 in, with a 22 lb limit and a clamp that takes desks up to 3.25 in thick. It is a fixed-pole design, so it holds the position you set rather than gliding up and down like a gas spring.

Specs

• Fits 13 to 32 in displays; ultrawides up to 38 in
• Maximum load 22 lb
• VESA 75 × 75 and 100 × 100 mm
• Maximum desk thickness 3.25 in
• Steel and aluminium construction
• 17 in centre pole; up to 16 in arm extension
• ±90° tilt, 360° swivel, 360° rotation
• Portrait and landscape operation
• Cable channels on the arm and the pole
• Clamp and grommet mounting

Check the VIVO STAND-V001 on Amazon

Pros

• Real cable channels on arm and pole at a low price
• Frees desktop surface compared with a factory stand
• Wide VESA and size coverage for the category

Cons

• Fixed-pole, so no one-handed height gliding
• The 22 lb limit governs, not the ultrawide size claim
• Focused on set-and-forget positioning

Verdict: the VIVO STAND-V001 earns its place on cost, footprint and honest cable channels rather than exotic hardware. Check the actual monitor weight and VESA pattern, because the 38-inch ultrawide line is a size label and the 22 lb limit is the real ceiling.

Perfect for: a single monitor that is positioned once and left, on a tight budget.

#5 HUANUO HNDS6 (FlowLift Dual): A Dual Gas-Spring Arm With Routing

The HNDS6 carries two 13 to 32 in monitors at 4.4 to 19.8 lb per arm, on gas springs HUANUO rates for 20,000 cycles. It mounts by C-clamp or grommet and includes integrated cable routing. The practical limit is channel volume: one report describes fitting one cable easily in the lower channel while the thicker power cable resisted, with the workable solution being to run the thin cables first and secure the thick one externally rather than forcing the cover.

Specs

• Supports two 13 to 32 in monitors
• 4.4 to 19.8 lb per arm
• +85° / -50° tilt, 180° swivel, 360° rotation
• Maximum vertical positioning approximately 15.75 in
• C-clamp and grommet mounting
• Aluminium-alloy arms and reinforced base
• Gas springs rated to 20,000 cycles
• Integrated cable routing
• Five-year warranty

Check the HUANUO HNDS6 on Amazon

Pros

• Dual-monitor lift on gas springs at a value position
• Cable routing is integrated and specifically noted by owners
• Five-year warranty

Cons

• The lower channel struggles with a thick power cable
• A single dual-arm base gives less independent positioning than two single arms
• 15.75 in of vertical travel is modest for a large desk

Verdict: the HUANUO HNDS6 is the pick for a two-screen desk that wants height adjustment and routing in one clamp. Treat the cable channel as designed for data cables and plan the power run accordingly. If independence matters more than a single base, the dual monitor arms comparison covers the two-single-arm alternative.

Perfect for: a dual-screen workstation that needs gas-spring height travel without moving down to a fixed riser.

#6 Ergotron LX 45-241-224: Premium Single Arm With a 10-Year Warranty

The LX is the premium single-arm pick, with a 7 to 25 lb range for displays up to 34 in and a lift mechanism Ergotron runs through a 10,000-cycle motion test. Cables route underneath the arm. Two official caveats matter: screens above 20 lb can lose vertical travel, and unusually deep monitors reduce effective capacity. On cable capacity, a long-term owner found room for monitor power plus Thunderbolt but not those two cables plus HDMI.

Specs

• Displays up to 34 in
• 7 to 25 lb / 3.2 to 11.3 kg
• VESA 75 × 75 and 100 × 100 mm
• Approximately 13 in / 33 cm vertical lift
• 75° tilt envelope; 360° pan and rotation
• Arm extends roughly 25 in / 64 cm
• Cables route underneath the arm
• Includes arm, extension, pole and base, two-piece clamp, grommet mount
• Aluminium construction
• 10,000-cycle motion test
• 10-year warranty
• Caveat: screens above 20 lb reduce vertical travel; deep monitors reduce effective capacity

Check the Ergotron LX on Amazon

Pros

• Very stable and easy to reposition
• 10-year warranty
• Cables route under the arm
• Includes both clamp and grommet hardware

Cons

• The cable channel fills quickly once you add a third cable
• Heavy or deep monitors lose vertical travel
• Priced at the premium end for a single arm

Verdict: the Ergotron LX is the pick when the mechanics matter more than the channel. It moves well, holds position and carries a decade of warranty, but its cable management is the weakest part of an otherwise strong arm. The Ergotron model guide covers how the LX sits against the wider range.

Perfect for: a single premium monitor on a desk where smooth repositioning is the daily requirement.

#7 Monoprice Workstream #43448: A Heavy-Duty Arm for 32 to 49-Inch Displays

This arm is built for 32 to 49 in displays with a 39.6 lb maximum, a full-motion gas spring and both clamp and through-hole mounting. Its VESA options include 75 × 75, 100 × 100 and 200 × 100 mm, which matters for larger panels. Weight alone does not describe the load on a tilt joint: a deep, strongly curved ultrawide pushes its centre of mass forward, so compatibility should be checked against the exact panel's weight, depth and curvature rather than the diagonal figure.

Specs

• Designed for 32 to 49 in displays
• Maximum load 39.6 lb
• Full-motion gas-spring arm
• Desk-edge clamp and through-hole mounting
• Landscape and portrait operation
• ±90° tilt, swivel and rotation
• VESA 75 × 75, 100 × 100, 200 × 100 mm
• Aluminium and steel construction
• Built-in cable management

Check the Monoprice Workstream 43448 on Amazon

Pros

• High 39.6 lb capacity with a 49 in reach
• 200 × 100 mm VESA option
• Full-motion gas spring
• Both clamp and through-hole fitting

Cons

• Deep curved panels still need a per-model check
• Little dependable aggregate owner data for this exact SKU
• No cable channel volume published

Verdict: the Monoprice #43448 is the pick for a large or super-ultrawide panel where the price of an enterprise arm is hard to justify. Verify the panel's depth and curvature against the tilt joint, not just its mass.

Perfect for: a 32 to 49-inch display on a desk that needs one arm to handle a heavy panel.

#8 Humanscale M8 Pro Dual (M82BB2BC): A Premium Office Dual Arm

The M8 Pro Dual targets workplace and design environments where materials, warranty and sit/stand compatibility carry weight. For this exact SKU the published figures are narrow: a 27 in maximum monitor width and a 1 to 12.5 lb weight range, with 360° rotation and stop options at 90° or 180°, 32° left and right pan, and tilt of 30° up and 15° down. Cables route through the arm and it is rated for sit/stand desks. The 15-year warranty is the standout number. It should not be treated as an ultrawide recommendation on price alone.

Specs

• Dual-monitor configuration, SKU M82BB2BC
• Maximum monitor width 27 in
• Weight range 1 to 12.5 lb (SKU-specific table)
• 360° rotation with stop options at 90° or 180°
• 32° left and right monitor pan
• 30° upward tilt, 15° downward tilt
• Cable management routes through the arm
• Compatible with sit/stand desks
• Die-cast aluminium with powder-coated finish
• 15-year warranty

Check the Humanscale M8 Pro Dual on Amazon

Pros

• 15-year warranty
• Cable routing built through the arm
• Rated for sit/stand desks
• Stop options keep the arms inside a fixed arc

Cons

• Restricted to 27 in width and 12.5 lb per monitor on this SKU
• Enterprise pricing
• Not a heavy or ultrawide arm despite the premium position

Verdict: the Humanscale M8 Pro Dual is the pick for a light, clean dual-monitor office desk where warranty and finish matter more than raw capacity. Read the SKU table before assuming premium means it takes a bigger panel.

Perfect for: a two-screen sit/stand office desk with monitors under the SKU's width and weight limits.

Comparison Table

Conclusion

The category splits cleanly. If you want the speakers inside the stand, the field is thin: the Philips SPA6500BK/00 for a full dock-and-audio package, or the MaxMount STB-211L for a wide budget platform. Almost everywhere else, "monitor stand with cable management" means an arm or a riser that hides one part of the run, and the real work is matching the mount to the screen and the desk rather than trusting the headline capacity.

Two habits keep the result clean. First, check the exact monitor: weight, VESA pattern, depth and curvature decide whether an arm holds its angle, and a diagonal figure does not. Second, treat arm routing as one layer only. The monitor cable disappears; the power brick, dock and wall run still need their own solution, and that is where a tray or a box finishes the job.

If you are refining the rest of the desk alongside the mount, the guide to hiding cables under your desk, the under-desk cable management trays and the cable management boxes pick up where the arm leaves off.

Check the current price of the Ergotron LX on Amazon